PDA

View Full Version : PANTERA


Nik
04-30-2005, 01:18 AM
does anybody have an early 80s deTomaso Pantera, for under $25,000?
llegos
04-30-2005, 02:16 AM
I thought those were made in the early 1970's? No? try collectorcartrader.com too.
Nik
05-01-2005, 10:03 PM
I thought those were made in the early 1970's? No? try collectorcartrader.com too.

1970 until 1991 i think
llegos
05-01-2005, 11:27 PM
o, ok. I have seen a couple on the site i posted, so check it out. Your taklin about the DeTomaso, ones. With the 351C
Nik
05-02-2005, 11:22 PM
yup DeTomaso with the cleveland in it
llegos
05-02-2005, 11:41 PM
How much you looking to spend on one?
Nik
05-03-2005, 06:16 PM
i dont want to spend more then $35,000, but if i need to, i will.
llegos
05-04-2005, 01:19 AM
Why do you want one so bad?
Nik
05-05-2005, 10:52 PM
i drove one last year at an autoshow, and i really liked the way the car acts like a $200k Ferrari, but he had his for sale for $45k. i did not have the money at the time, so i was unable to buy it. Also the 351 Cleavland is alot easier to get parts for and work on at a local shop, minnesota is a tough place to get exotic car parts, so the ford motor really hits the spot.
CLKcadet
05-06-2005, 11:43 AM
it was a great car back in the day, saw it on classic car and driver (on spike channel) good luck with the purchase if i see something i will let you know meanwhile check out ebay and cars.com etc
llegos
05-07-2005, 02:42 PM
have you tried collectorcartrader.com like i have told you? also, try hemmings.com
Ryan
03-04-2007, 02:26 AM
i dont want to spend more then $35,000, but if i need to, i will.

Bump. I think Nik is still looking.
chunky
03-04-2007, 02:37 AM
holy old thread
Teck Mafia
03-04-2007, 03:24 AM
:rofl: :rofl: :rofl: I was gonna be like wait don't you already have one of those?!
123456
03-04-2007, 12:39 PM
OMGeeeeez. I fail. lolol
l3it3r
03-04-2007, 12:44 PM
:rofl: :rofl: :rofl: I was gonna be like wait don't you already have one of those?!
:rofl:
Ryan
03-04-2007, 01:34 PM
OMGeeeeez. I fail. lolol

See, now that's what I'm talking about. Everybody needs to know how to laugh at themselves every once in a while. :)
2 FN LOW
03-04-2007, 02:46 PM
hahahahahahahahahahahahahahahahahahaha

BTW, you know nothing about the 351C...
Fallout
03-04-2007, 03:32 PM
:rofl: that is never lived down lol.
123456
03-04-2007, 04:02 PM
See, now that's what I'm talking about. Everybody needs to know how to laugh at themselves every once in a while. :)
Hell yes Im laughing at myself. hahhahaha.
I busted out laughing when I saw that it was bumped... from May 7th.... 2005!!!! hahahaha.
Also....Get a new sig with both of your cars in it. :)
2 FN LOW
03-04-2007, 04:04 PM
i can sell you the 351C if you still want that....Got a tranny to go with it if you wanna drop it in something...SB 5.8L boiiiii
123456
03-04-2007, 04:13 PM
I has no money, Joey.
But a quick question.
What other cars did the Cleveland go into?
And whats the difference between that, and a regular 351?
2 FN LOW
03-04-2007, 05:15 PM
what do you mean regular 351? The 351 is part of the 335 Series...Theres the 351Cleveland...351Modified...400Modified

theres also a 351Windsor but thats not really known to be in a series, its just known as a small block and gets left with the 221/260/289/303...

The 351C and the 351W are somewhat the same but the Windsor is more popular and there are a lot more parts for it...The block on the 351C is notorious for cracking...They both have the same spacing with a 4inch bore but the block on the 351C is heavier and the oiling system, cooling system and timing cover design are totally different..You can get more power from a 351C then you can a 351W but the 351C is still not that popular, hence why parts can be hard to get for it...The engine was only produced for 4years (1970-1974) so the casts for parts are limited..The 351M and the 400M were produced after they stopped making the 351C....Its pretty much the same but when going for a small block people usually stay away from these 2 engines cause they have an even heavier block and big block bellhousing bolt patterns.
memyselfai
03-04-2007, 05:21 PM
DAMN!!! you know your damn motors!
Ryan
03-04-2007, 05:32 PM
Also....Get a new sig with both of your cars in it. :)

:dunno:
2 FN LOW
03-04-2007, 05:44 PM
DAMN!!! you know your damn motors!

and those are just Ford engines :D

i also have a 351C in my pickup
123456
03-04-2007, 06:20 PM
Ryan... New sig looks good! :)

Joey.... Thanks for the info. You sure know a lot about american motors. lol.
Zor
03-04-2007, 07:03 PM
::slaps Ryan with the ban stick::

NO BUMPING 3 YEAR OLD THREADS!